Close

Absolute Rated Meltblown Cartridge Filter



Stratum A Series Meltblown Depth Filters deliver 99.9% efficiency at the stated micron for the most demanding applications. By utilizing ultra fine fibers and controlled thermal bonded, the Stratum A Series retains captured contaminant even at higher differential pressures. 

Request a quote

Absolute retention ratings from 0.5 to 70 microns
Multi-zone Meltblown Depth Filters with a graded pore structure structure for maximum dirt holding capacity
Thermally Bonded Fibers for high void volume and long on-stream life
Lot Traceable Filters come with certificate of conformance
100% Pure Virgin Polypropylene
Molded Center Core for Higher Temperature and Pressure Capability 
Free of Surfactants, Binders and Adhesives 

Specifications:
Media -- Polypropylene
Inner Core, End Caps, Cage -- Polypropylene 
Gaskets/O-Rings -- Buna-N, EPDM, Santoprene, Silicone, Teflon Encapsulated Viton (O-Rings Only), Viton
Micron Ratings -- 0.5, 1, 3, 5, 10, 20, 30, 50, 70 Micron
Nominal Lengths -- 5" (12.7 cm), 10" (25.4 cm), 19.5" (49.5 cm), 20" (50.8 cm), 29.25" (74.3 cm), 30" (76.2 cm), 39" (99.1 cm), 40" (101.6 cm)
Outside Diameter -- 2.5" (6.35 cm)
Inside Diameter -- 1.0" (2.54 cm)

Operating Parameters:
Maximum Differential Pressure -- 150 psid @ 68°F (10.3 bar @ 20°C), 90 psid @ 150°F (6.2 bar @ 66°C), 35 psid @ 176°F (2.4 bar @ 80°C)
Recommended Changeout Pressure -- 35 psid (2.4 bar)
Steam Sterilization - Stratum Single Open End Style Filters may be autoclaved under no end load conditions for 30 minutes at 121°C. Filters should be cooled to normal operating temperatures prior to use. 

Below is all information pertaining to the Stratum A Filter:

Stratum A Cartridge Filter

Cannot find the configuration you are looking for? We would be happy to issue you a formal quote with exactly what you need.


Learn about New Products, Discounts, and more!