Economy Water Grade Cartridges
Absolute Rated Polyethersulfone (PES) Membrane Filter Cartridges
This WaterTEC Filter Series is constructed of absolute rated, hydrophilic, Asymmetric Polyethersulfone Membrane and Polypropylene Components. The Filter is designed for overall filtration economy and provides excellent flow rates and throughputs.
Low pressure drop reduces energy costs
High dirt holding capacity minimizes changeouts and downtime
All thermal bonded construction with no adhesives
Available in all common configurations to allow use of existing filter housings
Cost-effective absolute filtration
Specifications:
Media -- Asymmetric Polyethersulfone Membrane
Inner Core, End Caps, Cage -- Polypropylene
Support Layers -- Spunbond Polypropylene
Gaskets/O-Rings -- Buna-N, EPDM, Silicone, Teflon Encapsulated Viton (O-Rings Only), and Viton
Micron Ratings -- 0.05, 0.1, 0.2, 0.45, 0.65
Nominal Lengths -- 5" (12.7 cm), 9.75" (24.8 cm), 10" (25.4 cm), 20" (50.8 cm), 30" (76.2 cm), 40" (101.6 cm)
Outside Diameter -- 2.7" (6.9" cm)
Inside Diameter -- 1.0" (2.54 cm)
Surface Area -- 6.0 ft² (0.63 m²) per 10" Element
Operating Parameters:
Maximum Sustained Operating Temperature -- 176°F at 20 PSID (80°C at 1.38 bar)
Maximum Differential Pressure -- 75 PSID @ 70°F (4.14 bar at 21°C) / 30 PSID at 160°F (2.8 bar at 71°C)
Maximum Reverse Differential Pressure -- 40 PSID at 70°F (2.8 bar at 21°C)
Recommended Changeout Pressure -- 35 PSID (2.4 bar)
Performance Specifications:
Cleaning/Sanitization: Compatible with most common chemical cleaning, sanitizing and sterilizing agents with pH range from 1-14. Consult factory for specific compatibility information.
Steam/Autoclave: Cartridges may be autoclaved for 30 minutes at 250°F (121°C) under no end load conditions . Cartridges fitted with steam insert may be steamed for at least (10) thirty-minute cycles at 275°F (135°C) not to exceed 3 PSID (0.21 bar).
Certifications:
USP Class VI: Meets USP Class VI Biological Test for Plastics
FDA Listed Materials: All materials comply with FDA Title 21 of the Code of Federal Regulations Sections 174.5, 177.1520 and 177.2440 as applicable for food and beverage contact.
European Directive for Food Contact: European Regulation No. 1935/2004 and European Regulation 10/2011: Tested for migration behavior and is suitable for contact with all kinds of foodstuffs with minimal rinse up. Data available upon request.
General Water Filtration
DI Water Prefilter
DI Water Post Filter
Aqueous Based Chemical Processing
Below is all information pertaining to the WaterTEC Cartridge Filter:
WaterTEC Cartridge Filter
Cannot find the configuration you are looking for? We would be happy to issue you a formal quote with exactly what you need.
