General Grade Cartridges
Absolute Rated Polyethersulfone (PES) Membrane Pleated Filter Cartridges
This pleated, disposable, filter element is constructed of absolute rated hydrophilic, Asymmetric Polyethersulfone Membrane Media with extended filter area to allow for a high system flow rate.
• 7.0 Ft² (0.65 m²) of Membrane surface area per 10" element - High throughput, longer on-line service reduces costly maintenance time
• Absolute rated membrane from 0.1-0.65 Micron
• Manufactured in an ISO Class 7 Cleanroom environment
• 100% Flushed with 18 Meg Ohm-cm DI Water and gross integrity tested
• Fixed pore construction eliminates dirt unloading as differential pressure increases
• Low Extractables
Specifications:
• Media -- Asymmetric Polyethersulfone Membrane
• Inner Core, End Caps, Cage -- Polypropylene
• Support Layers -- Spunbond Polypropylene
• Gaskets/O-Rings -- Buna-N, EPDM, Silicone, Teflon Encapsulated Viton (O-Rings Only), and Viton
• Micron Ratings -- 0.1, 0.2, 0.45, 0.65
• Nominal Lengths -- 9.75" (24.8 cm), 10" (25.4 cm), 20" (50.8 cm), 30" (76.2 cm), 40" (101.6 cm)
• Outside Diameter -- 2.7" (6.9" cm)
• Inside Diameter -- 1.0" (2.54 cm)
• Surface Area -- 7.0 ft² (0.63 m²) per 10" Element
Operating Parameters:
• Maximum Sustained Operating Temperature -- 176°F at 20 PSID (80°C at 1.38 bar)
• Maximum Differential Pressure -- 80 PSID @ 70°F (4.14 bar at 21°C) / 40 PSID at 160°F (2.8 bar at 71°C)
• Maximum Reverse Differential Pressure -- 40 PSID at 70°F (2.8 bar at 21°C)
• Recommended Changeout Pressure -- 35 PSID (2.4 bar)
Performance Specifications:
• Hot DI Water: Filter Cartridge will withstand temperatures of 185°F (85°C) for up to 30 consecutive minutes
• Cleaning/Sanitization: Compatible with most common chemical cleaning, sanitizing, and sterilizing agents with pH range from 1-14. Consult Factory for specific compatibility information
• Steam/Autoclave: Cartridges may be steamed or autoclaved for at least (50) Thirty-minute cycles at 275°F (135°C)
Certifications:
• USP Class VI: Meets USP Class VI Biological Test for Plastics
• FDA Listed Materials: All materials comply with FDA Title 21 of the Code of Federal Regulations Sections 174.5, 177.1520 and 177.2440 as applicable for food and beverage contact.
• European Directive for Food Contact: European Regulation No. 1935/2004 and European Regulation 10/2011: Tested for migration behavior and is suitable for contact with all kinds of foodstuffs with minimal rinse up. Data available upon request.
• Food and Beverage
• Filtration of Acids and Bases
• Cosmetics
• Inks
• Chemicals
• Ultra Pure Water
• Aqueous Solutions
Below is all information pertaining to the ZTEC G Cartridge Filter:
ZTEC G Cartridge Filter
Cannot find the configuration you are looking for? We would be happy to issue you a formal quote with exactly what you need.
Call 1-877-ANY-FILTER, Email, or LiveChat Today!
