Nominal Single Layer Polypropylene Cartridges

Economically Efficient Pleated Filter Cartridge

This cost effective, disposable filter element can be used for a wide range of applications. The filter is constructed of Pleated Polypropylene filter media with high surface area that allows for greater system flow rate.

 Micron Ratings from 0.2-50 Micron
 Fixed pore structures - Resists unloading of captured contaminant
Polypropylene Construction - Inert to many process fluids
Various Gasket/O-Ring Materials - Compatible with a variety of fluids
Economically efficient filtration
Manufactured in continuous lengths up to 40 inches

Specifications:
Media -- Polypropylene
Gaskets/O-Rings -- Buna-N, EPDM, Silicone, Teflon Encapsulated Viton (O-Rings Only), and Viton
Micron Ratings -- 0.2, 0.25, 0.45, 0.45, 0.5, 1.0, 2.0, 5.0, 10, 25, 50 Micron
Nominal Lengths -- 5" (12.7 cm), 9.75" (24.8 cm), 10" (25.4 cm), 20" (50.8 cm), 30" (76.2 cm), 40" (101.6 cm)
Outside Diameter -- 2.7" (6.86" cm)
Inside Diameter -- 1.0" (2.54 cm)

Operating Parameters:
Maximum Operating Temperature -- 176°F (80°C)
Maximum Differential Pressure -- 75 PSID @ 70°F (5.2 bar at 21°C) / 30 PSID at 176°F (2.0 bar at 80°C)
Maximum Reverse Pressure -- 40 PSID at 70°F (2.8 bar at 21°C)
Recommended Changeout Pressure -- 35 PSID (2.4 bar)

Certifications:
USP Class VI: Meets USP Class VI Biological Test for Plastics
FDA Listed Materials: All Materials comply with FDA Title 21 of the Code of Federal Regulations Sections 174.5, 177.1520, and 177.2440 as applicable for food and beverage contact.
European Directive for Direct Food Contact: European Regulation No. 1935/2004 and European Regulation 10/2011: Tested for migration behavior and is suitable for contact with all kinds of foodstuffs with minimal rinse-up. Data available upon request. 

Below is all information pertaining to the PMC Series Cartridge Filter:

PMC Cartridge Filter

Cannot find the configuration you are looking for? We would be happy to issue you a formal quote with exactly what you need.