
Nylon 6,6 Membrane Cartridges
General Grade Nylon 6,6 Cartridges are designed for general purpose use wherever a cost-effective membrane filter is required. GGHNY Cartridges are available in both standard and Plus+ Grades. The Plus+ Grade Membrane is modified with a highly positive charge; allowing for the removal of particles that are significantly smaller than the membrane's rating. The extended area option (GGHNYX) offers up to 40% more surface area. This additional area results in significant increases in flow rate and loading capacity in the same footprint.
Construction
• Membrane -- Nylon 6,6
• Support Media -- Polypropylene
• Inner Core, End Caps, Cage -- Polypropylene
• Gaskets/O-Rings -- Buna-N, EPDM, Silicone, Viton, Teflon Encapsulated Viton
• Micron Ratings -- 0.03, 0.05, 0.1, 0.2, 0.45, 0.65, 0.8, 1.2
• Nominal Lengths -- 10", 20", 30", 40"
• Outside Diameter -- 2.7" (6.9" cm)
Operating Parameters
• Maximum Operating Temperature -- 175°F
• Maximum Differential Pressure -- 50 PSI (Forward), 40 PSI (Reverse)
Sanitization/Sterilization
• Filtered Hot Water -- 80°C for 30 Minutes
• Steam Sterilization -- 121°C for 30 Minutes, Multiple Cycles
• Chemicals - Cartridges are chemically compatible with most chemicals and sanitizing agents
• Note: Stainless Steel Insert option needed for all Cartridges being hot water Sanitized or steam sterilized.
• Drinking Water
• Wine
• Soft Drinks
• Pharmaceutical
• Fermentation
• Endotoxin Removal
Below is all information pertaining to the Nylon 6,6 Membrane Cartridge Filter:
Nylon 6,6 Cartridge Filter
Cannot find the configuration you are looking for? We would be happy to issue you a formal quote with exactly what you need.
Call 1-877-ANY-FILTER, Email, or LiveChat Today!